Brooks Plumbing Co. Blog: Archive for November, 2011

Emergency Plumbing Tips

Wednesday, November 30th, 2011

When you have a plumbing emergency in your Tumwater home, the last thing you want to do is make the problem worse, but if you don’t act fast, that’s exactly what might happen. To help you take the right actions and avoid the wrong ones, here are some quick tips for how to handle a plumbing emergency.

  • Shutting Off the Water – If a pipe bursts or you have standing water somewhere, the very first step you take is to shut off the water. Cleanup is pointless if more water pours in. So, we need to stop the flow. Usually, this water valve is located outside, but it can be found under an access panel or in the basement in some cases.
  • Flooding Toilet – Watching the water slowly rise in a toilet, dangerously close to the rim, can be scary. But, there are tricks to slow or stop the flow until the plumber arrives. The first is to turn on your sink faucet to slow down the water flow to the toilet. If you can reach it, turn off the cold water supply to your toilet as well. As soon as the tank is empty, no new water will enter.
  • Turning Off an Appliance – Sometimes the problem isn’t a house-wide problem but a specific appliance overflowing. If your washing machine or dishwasher is about to overflow, turn off the supply valve immediately. It could be several gallons of water per minute if you don’t.
  • When Electricity is Involved – If your basement floods, don’t go down there until you can be sure there is no electricity flowing into the water. That much water with live electricity is incredibly dangerous. If you can’t be sure, get a plumber out there fast.
  • Gas Leaks – Sometimes, a plumbing problem is really a gas problem. If this is the case, don’t try to fix it yourself. Get everyone out of the house and call the gas company immediately.
  • Hot Water Leakage – If you notice that hot water is leaking somewhere in your home, turn off the main water supply and then turn off the hot water heater’s energy source. There should be an emergency shutoff valve on the hot water heater for gas and a switch on the device if it is electric.

In each of these cases, the very next step you take should be to call a plumber, but if you act fast you can hopefully mitigate the damage.

Continue Reading

Happy Thanksgiving!

Thursday, November 24th, 2011

Happy Thanksgiving! We are very thankful for all of our customers; you really make what we do worthwhile. We hope you all have a great holiday and enjoy a delicious Thanksgiving feast! And if you are looking for some dessert ideas, here is a recipe for pumpkin pie from allrecipes.com that will make today a little sweeter:

Mrs. Sigg’s Fresh Pumpkin Pie

“A mixture of fresh pumpkin puree, brown sugar, spices, evaporated milk and eggs is poured into a prepared pie crust and baked. ”

INGREDIENTS:

  • 1 sugar pumpkin
  • 1 recipe pastry for a 9 inch single crust pie
  • 2 eggs
  • 1 cup packed light brown sugar
  • 1 tablespoon all-purpose flour
  • 1/2 teaspoon salt
  • 2 1/2 teaspoons pumpkin pie spice
  • 1 (12 fluid ounce) can evaporated milk

DIRECTIONS:

  1. Cut pumpkin in half and remove seeds. Place cut side down on a cookie sheet lined with lightly oiled aluminum foil. Bake at 325 degrees F (165 degrees C) for 30 to 40 minutes, or until the flesh is tender when poked with a fork. Cool until just warm. Scrape the pumpkin flesh from the peel. Either mash, or puree in small batches in a blender. Increase oven temperature to 450 degrees F (230 degrees C.)
  2. In a large bowl, slightly beat eggs. Add brown sugar, flour, salt, 2 cups of the pumpkin puree, pumpkin pie spice, and evaporated milk. Stir well after each addition.
  3. Pour mixture into the unbaked pastry shell. Place a strip of aluminum foil around the edge of the crust to prevent over browning.
  4. Bake 10 minutes at 450 degrees F (230 degrees C), then reduce the oven temperature to 350 degrees F (175 degrees C). Bake an additional 40 to 50 minutes, or until a toothpick inserted near the center comes out clean. Remove the strip of foil about 20 minutes before the pie is done so that the edge of the crust will be a light golden brown. Cool pie, and refrigerate overnight for best flavor.

For more details, click here.

Continue Reading

How to Install a Toilet

Wednesday, November 23rd, 2011

A toilet is a relatively basic piece of plumbing equipment, but that does not mean that installing it is easy. This is certainly a job that many people can do on their own, without the help of a Lacey plumber,  but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other. And if you have any questions, talk to your Lacey plumber.

Continue Reading

How to Prevent Bathroom Water Damage: A Guide

Friday, November 18th, 2011

Water damage. Even the mere mention of potential damage from excess water your Olympia house is enough to send a chill down your spine. However, there are a number of things you can do to avoid such damage, especially in the bathroom.

The Bathtub

The biggest single contributors to water damage are the shower and bathtub, where gallons upon gallons of water are distributed every day. You can minimize damage by doing the following:

  • Tiles – Check for missing or cracked tiles and replace them immediately. Supplement the tiles with grout that is properly sealed and check for any potential leaks.
  • Keep it Dry – There is a lot of water in your bathroom. Keep it off the floor by drying it up after a shower, hair washing or any other moisture producing activity in the bathroom. Make sure you minimize the risk of excess water by placing bathmats on the floor outside your shower.
  • Exhaust Fan – Water builds up in a bathroom because there is no moving air. Humidity can be just as damaging as actual wetness, especially if it settles in cooler temperatures. To avoid this happening, install an exhaust fan attached to the light switch to draw out any moisture after a shower.

Sinks and Fixtures

  • Check Under the Sink – Look under the sink and make sure there are no drips from the faucet and no leaks from the trap. You may simply need to check and clean the trap once every month or so.
  • Seals – Check sink seals on a regular basis for cracks or leaks and replace them when necessary.
  • Speed of Drainage – If the sink drains slowly, the drain may be clogged. Check the trap and if that doesn’t help, pour a mixture of vinegar and baking soda down weekly.
  • Upgrades – Upgrade your fixtures to save water. Toilets eat water to the tune of 40% of your annual consumption and your shower head can be made almost twice as efficient without cutting into your comfort level. If you notice a drip, crack or leak from any of these devices, simply upgrade them and you’ll save a lot of water (and reduce how much of it could leak if a problem occurs in the future).

There are a lot of ways to avoid water leaks in your bathroom. Keep a close eye on things and it will be much easier than if you waited for a full blown problem to develop.

Continue Reading

Check Out Our Blog for the Latest in Plumbing Technology

Tuesday, November 8th, 2011

Be sure to bookmark the Brooks Plumbing Co. blog for updates on the latest advances in Plumbing technology.

We’ll feature money saving promotions here as well.

Call Brooks Plumbing Co. for all your Plumbing, Water Heater, Drain & Sewer, and Commercial Plumbing needs.

Continue Reading

Welcome to Our New Website

Tuesday, November 8th, 2011

iMarket Solutions has launched Brooks Plumbing Co.’s new custom website. To learn more about how iMarket Solutions can expand your presence on the web visit: www.imarketsolutions.com

Continue Reading